Installing VMware ESX 3.0.x in a VMware Workstation 6.0 – Is it possible ??
Ohhh, yes it is.. Take a look at this WhitePaper published by Xtravirt.com Nice job guys. A. Mikkelsen
Installing VMware Server on Ubuntu 7.04 (Feisty Fawn)
I found this guide to install VMware Server on Ubuntu 7.04 Haven’t testet it, so i hope it works.. http://www.howtoforge.com/ubuntu_feisty_fawn_vmware_server_howto
The Health Project has moved to Sourceforge.net …….
We have decided to move the Health Check project files to https://sourceforge.net/projects/esxhealthscript/. This is primary because we needed a place were more than one developer could upload new versions, but also a way for the developers to keep an updated list of new features. We hope this movement will help to make the Health Check… Read More »
Installing VMware Server on Fedora Core 6
1. Download and install Download the Fedora Core 6 CD or DVD image from http://fedoraproject.org/wiki/. If your computers hardware is i686 or i686 capable read this to to bypass a common bug in the Anaconda installer. Specify “linux i686“Â at the installation boot promt. Disable IPV6 in the Network Device Screen. It can be done manually… Read More »
Health script version 0.011 released
I just added a few things to the script: – Added info about SCSI RAID controller
SATA controllers that work with ESX 3.0.1
Here is a short list of SATA controleres that will work with ESX 3.01 LSI MegaRAID 150-4 LSI MegaRAID 150-6 Intel SRCS16 Adaptec 2610SA Adaptec 2410SA For more info take a look at VMwares system guide. http://www.vmware.com/pdf/vi3_systems_guide.pdf
Service Unavailable – On a Windows 2003 SP1 server.
Today, after installing a VM with Windows 2003 ee, SP1 and IIS, I got ‘Service Unavailable’ when i tried to see it the webserver worked as planned. After quite a bit of googleing, I found a working solution. http://support.microsoft.com/kb/899965 In Start -> Run type “dcomcnfg” Right Click “IIS Admin Service” under Component Services -> Computers -> My Computer… Read More »
Health script version 0.010 released
I just added a few things to the script: – Added info about SC memory – Added Firewall services – Added NAS/shares connected - Added show USB host controller type – Edited way IP address was obtained – Edited my_ntp_server back so it doesn’t use sed - Edited my_hostname
Health script version 0.009 released
Thanks to Nick Rosenberg for helping refine some of the commands. – Edited the gathering of PermitRootLogin to ignore comments - Edited my_ntp_server to use sed
Health script version 0.008 released
Dafa has done it again and added: – Added show number of cpu cores and KHz